Dealing with low water pressure is always a hassle, so here are some tips to help you get your home’s water pressure back to normal again!
A lot of northern Utah homeowners don’t realize this, but some area codes allow water pressure that’s as low as 20 pounds per square inch (psi), which is way lower than the 40-80 psi recommendation!
Low water pressure is a major issue that plagues properties throughout our region, and we’ve helped countless homeowners who’ve experienced difficulties with everyday tasks due to their low water pressure.
If you’re noticing low water pressure at your home or business, you should know that it’s a plumbing issue that needs to dealt with as quickly as possible. Our Master Plumbers are always here to support you when you make an appointment with us, and below we’re offering a list of helpful tips to support your water pressure repair needs!
1. Be Sure To Test Your Property’s Water Pressure
The very first step is to properly test your property’s water pressure, just so you can know for sure how low it is. The easiest way to do this is to connect a test gauge to a hose connection.
Be sure that all of your other faucets are off, and that all of your water-using appliances aren’t running. If your reading says 80 psi, then your water pressure is too high. If it says 40-50 psi, then you’re treading on the lower side. Anything below 40 psi is too low!
2. Get In Touch With Your Neighbors
If you have low water pressure at your house, it’s also a good idea to ask your neighbors if they’re going through the same issue. If they also have low water pressure, then there could be a dilemma with your street’s municipal water connection.
3. Examine Your Plumbing System For Clogs
If your water pressure reading is normal, then your low water pressure could be the result of a clog within your plumbing system. Pipes will often experience mineral buildup that leads to an obstruction, and this is particularly an issue here in northern Utah.
It’s important to keep in mind that very serious clogs could require re-piping, but most clogs can be eliminated via our hydro jetting services.
4. Valve Inspections
Every residential plumbing system functions through a main water valve, which controls all of the water flow throughout a property’s pipes.
Not only do you need to ensure that this valve is fully open, but you may need to invest in maintenance and repair services to get your water pressure back to normal again.
Sometimes this is an easy fix, but other times it may require professional attention.
5. Be On The Lookout For Leaks
Leaks are another common cause for low water pressure issues, because damaged/cracked pipes will always lead to lost water.
These types of pipe inspections can often be a lot easier said than done, but the good news is that Beehive Plumbing offers comprehensive leak detection services. We’ll utilize all sorts of cutting-edge technology to pinpoint exactly where your leak is originating from, and we’ll be able to find it within a matter of a couple hours!
6. Replacing Your Regulator
The vast majority of homes in northern Utah rely upon municipal water sources, which means these properties have a regulator located near the local service line. Your home’s regulator is what helps guarantee that your water doesn’t rush too quickly through your pipes.
But a lot of properties will experience low water pressure issues when their regulators are malfunctioning, so the best way to resolve this dilemma is to replace the aging regulator. This is never a DIY job, and our team will know your neighborhood’s local codes in terms of how exactly these replacements should be conducted.
7. Use a Booster Pump To Increase Your Home’s Water Pressure
There are also many instances in northern Utah in which water supplies have to travel long distances and up massive hills, which can detrimentally impact water pressure.
This is why a lot of homes in our area have installed a water pressure booster pump to support this dilemma. These incredible pumps do a great job at cutting into a municipal supply line and charging up the water pressure to reach optimal levels.
It’s also important to keep in mind that these booster pumps will slightly increase your property’s monthly energy bill, but this added cost is often worthwhile for many homes up in the mountains!
8. Call Your Local Water Department
It’s sometimes necessary for homeowners to reach out to their municipal water department, because they may need to be the ones who run certain tests on your property’s water delivery.
The good news is that these tests are usually free, and they’ll fix any dilemmas that are originating within public lines. However, if their tests don’t show any issues, the water pressure issue is likely originating from within your property’s plumbing system!
9. Expansion Tanks & Water Pumps
A lot of homes in northern Utah use a well water system, and water pressure issues in these systems often originate from water pump malfunctions and expansion tank leaks.
When an issue occurs with either of these vital components, sudden water pressure drops are imminent. Be sure to contact our well system specialists when you need help resolving this type of issue!
Our Master Plumbers Are Here To Help Get Your Home’s Water Pressure Back To Normal Again!
Beehive Plumbing has been one of the leading plumbing companies in northern Utah for over 20 years, so we’ve seen countless water pressure repair jobs that require expert assistance. Our Master Plumbers are some of the very best in the entire region, and our team will be there for you when something’s wrong with your property’s water pressure.
Reach out to us online or give us a call at 801-849-3842 to get in touch with us today and let us know what water pressure symptoms you’re currently experiencing!